Description
Sennheiser XLR BASE SET Specs
System
Frequency Range | 2.400 to 2.483 GHz |
Latency | <4 ms with aptX Live Codec |
Transmission Range | 250′ / 76.2 m (Line of Sight) |
Simultaneous Operation of Units | Up to 5 Systems Simultaneously |
Frequency Response | 80 Hz to 18 kHz |
Signal-to-Noise Ratio | ≥106 dB |
THD | <0.1 % |
Modulation | GFSK with TDMA |
Operating Temperature | -10 to 55° C / 14 to 131° F |
Relative Humidity | 95% (Non-Condensing) |
Transmitter
Type | Plug-On Transmitter |
Input Connector | XLR-Female |
Phantom Power | No |
RF Output Power | 10 mW |
Input Level | Mic-Level Input Only |
Battery | Type: Built-In, USB-Rechargeable, Lithium-Ion Battery Life: 5 Hours Charging Time: 3 Hours (Typical) Charging Cycles: Up to 1000 Cycles Nominal Voltage: 3.7 V Cell Capacity: 850 mAh Input Voltage: 5.0 V (Typical) Charging Temperature: 32 to 140° F / 0 to 60° C |
Dimensions | 4.0 x 0.9 x 1.1″ / 102 x 24 x 28 mm |
Weight | Not Specified by Manufacturer |
Receiver
Type | Plug-In |
Output Connector | XLR-Male |
Audio Output Level | Consumer Line-Level Only: -12 dBu (Maximum) |
Battery | Type: Built-In, USB-Rechargeable, Lithium-Ion Battery Life: 5 Hours Charging Time: 3 Hours (Typical) Charging Cycles: Up to 1000 Cycles Nominal Voltage: 3.7 V Cell Capacity: 850 mAh Input Voltage: 5.0 V (Typical) Charging Temperature: 32 to 140° F / 0 to 60° C |
Dimensions | 4.3 x 0.9 x 1.1″ / 109 x 24 x 28 mm |
Weight | Not Specified by Manufacturer |
Packaging Info
Package Weight | 0.75 lb |
Box Dimensions (LxWxH) | 11.4 x 5.7 x 0.71″ |