Description
Sennheiser XSW-D Specs
System
| Frequency Range | 2.400 to 2.483 GHz |
| Latency | <4 ms with aptX Live Codec |
| Transmission Range | 250′ / 76.2 m (Line of Sight) |
| Simultaneous Operation of Units | Up to 5 Systems Simultaneously |
| Frequency Response | 10 Hz to 18 kHz |
| Signal-to-Noise Ratio | ≥106 dB |
| THD | <0.1 % |
| Modulation | GFSK with TDMA |
| Operating Temperature | -10 to 55° C / 14 to 131° F |
| Relative Humidity | 95% (Non-Condensing) |
Transmitter
| Type | 1/4″ Plug-On Transmitter |
| Input Connector | 1/4″ / 6.3 mm TS, Male, Foldable (90°) |
| RF Output Power | 10 mW, Maximum (EIRP) |
| Input Sensitivity | Instrument-Level Input Only |
| Battery | Type: Built-In, USB-Rechargeable, Lithium-Ion Battery Life: 5 Hours Charging Time: 3 Hours (Typical) Charging Cycles: Up to 1000 Cycles Nominal Voltage: 3.7 V Cell Capacity: 850 mAh Input Voltage: 5.0 V (Typical) Charging Temperature: 32 to 140° F / 0 to 60° C |
| Dimensions | 4.8 x 0.9 x 1.1″ / 122 x 24 x 28 mm |
| Weight | Not Specified by Manufacturer |
Packaging Info
| Package Weight | 0.475 lb |
| Box Dimensions (LxWxH) | 9.5 x 4.5 x 2.8″ |
