lighting & grip rentals - dolly, jib arms, & track

MAIN MENU

ON-SITE EVENTS

At Birns & Sawyer

"Lunch With Mike"

Next Lunch

Wednesday, April 3rd

at Birns And Sawyer

12pm-1pm

Home / lighting & grip rentals

LIGHTING & GRIP RENTALS

DOLLY, JIB ARMS, & TRACK

PORTA-GLIDE 90 SYSTEM

This system comes with two sleds attached to skate board wheels. It will make turns previously thought impossible by using 45 degree or 90 degree curved track. Drop any dolly ( Fisher,Chapman,Panther,or Doorway )onto the sleds and make sharp curves and continuous straght track moves. Simple and inexpensive but well engineered.

STRAIGHT TRACK

Heavy Wall track is manufactured from 1 1/2" diameter steel and is chrome plated to protect it from negative environmental effects. Track folds to a small profile for storage or transportation. Available for rental are 10´ 8´ 6´ 4´ and 2´ lengths with an additional starter track accessory.

90 DEGREE CURVED TRACK

Four 90 Degree curved track sections are required to form a 360 Degree circle. In addition skateboard track wheels in a "centipede" configuration or "universal track wheels" are also necessary in order to navigate in a circle. A maximun 1200 lbs and a minimum of 200 lbs are the load limits.

BRIEFCASE DOLLY

A smaller alternative to the traditional doorway dolly (6"x19.5"x29"). A perfect candidate if you don´t have the room and need space. This Briefcase Dolly made by MSE is airline transportable and will support 500lbs.(227kg) on either straight or curve track. Caster wheels and skate wheels are packed within a heavy duty case which opens into the dolly platform itself.

DOORWAY DOLLY

The doorway dolly will move through a full range of travel with either the push bar and pull bar. The platform can be flipped over for lower camera positioning. Ground clearance is 9" or 3" when inverted. The removable side boards add an extra 10" per side for increased platform width. The platform is fitted with a recessed camera tie- down and is carpeted for a nonslip, low maintenance feature.

LOSSMANDY STANDARD PORTA-JIB

The standard of all camera jibs! The Lossmandy Standard Porta-Jib is versatile, lightweight device thats easy to assemble and breaks down in minutes. Use a 100mm, 150mm or Mitchell base plate at no extra cost; sits on Heavy Duty sticks and could mount on any dolly. **Tripod and rolling spreaders not included** ($165 - 1 Day Week)

LOSSMANDY PORTA-JIB TRAVELLER

Easy to assemble and easy to travel with. This tough little device can hold up to 40lbs camera and fluid head weight. Perfect for video cameras and a tight budget. Mounts onto 100mm ball sticks and any dolly. ***Tripod and spreaders not included*** ($135 - 1 Day Week)

MSE INTEL-A-JIB

The Matthews Studio Equipment INTEL-A JIB is the largest jib in on our shelves. The INTEL-A-JIB has a 6´ to 10´ configuration and capable of mounting a 100mm or Mitchell based fluid head. ***Tripod, spreaders, and head not included*** ($250 - 1 Day Week)

LIGHT WEIGHT CINE SLIDER

Our price: $150.00 a day

The CineSlider™ can be center mounted flush to the Kessler Hercules 2.0 head to achieve panning and tilting movements, center mounted to a 100mm bowl tripod with the optional 100mm Ball Mount Kit, or support from both ends with a combination of a standard tripod / fluid head or lightstand or monopod.

CINEPED ROTO SLIDER

Our price: Call for details

Industry´s first rotational slider! The Cineped Roto slider is 42" long and provides 3´ of travel. Birns & Sawyer will discount $1,000.00 on orders made before December 31st.

Filter for dolly, jib arms, & track